 2001 Jun. vol. 33 issue 2 |
1 |
過時效熱處理鐵鋁錳碳合金之微細晶粒組織與超順磁特性 / 林英志(Yin-Chih Lin) 61-74
Nanostructure and Superparamagnetic Property of Overaged Fe-Al-Mn-C Alloys林英志(Yin-Chih Lin) |
2 |
大氣與氮氣氛中熔製耐久性銅麟酸鹽玻璃之性質研究 / 施並裕(P. Y. Shih) 75-81
Properties of Durable Copper-Phosphate Glasses Melted in Air and Nitrogen Atmosphere |
3 |
改良型Ni-Cr-Mo鋼機械性能研究 / 胡家榮(C. J. Hu);陳俊雄(J. S. Chen);馬堅勇(C. Y. Ma);黃鼎貴(D. G. Hwang);李丕耀(P. Y. Lee) 82-88
Investigation on the Mechanical Properties of Improved Ni-Cr-Mo Steel |
4 |
保護氣體加氮隊沃斯田鐵不銹鋼銲道肥粒相之影響 / 曾光宏(K. H. Tseng);周長彬(C. P. Chou) 89-93
Effect of Nitrogen is added in Argon Shielding Gas on the Retained Ferrite of Austenitic Stainless Steel Weld Metals |
5 |
灰鑄鐵衝擊力學特性之研究 / 李深智(S. C. Lee);許正勳(C. H. Hsu);呂榕凱(J. K. Lu);王禮立(L. L. Wang);董新龍(X. L. Dong) 94-98
A Study of Impact Mechanics of Gray Cast Iron |
6 |
含鉛灰鑄鐵之破裂韌性研究 / 許正勳(C. H. Hsu);李深智(S. C. Lee);馮慧平(H. P. Feng);卓良憶(L. Y. Cho) 99-104
Study of Fracture Toughness of Gray Iron Containing Lead |
7 |
麻田散鐵不銹鋼鑄件回火組織與中/低溫衝擊韌性研究 / 許正勳(C. H. Hsu);李深智(S. C. Lee);鄧惠源(H. Y. Teng);陳鴻銘(H. M. Chen) 105-110
Study of Medium/Low Temperature Impact Toughness and Tempered Structure of Martensitic Cast Stainless Steel |
8 |
冷軋退火製程對Invar結晶方向及磁性之影響 / 江柏風(B. F. Jiang);張樹發(S. F. Chang);劉金耀(J. Y. Liu);謝景諒(C. L. Hsieh);劉瑞贇(J. Y. Liun);楊正之(C. C. Yang) 111-116
Effects of Cold Rolling and Annealing on Texture and Magnetic Property of Invar Alloy |
9 |
鐵鋁錳合金應用在造粒機造粒系統之開發研究 / 趙志燁(C. Y. Chao);林國書(K. S. Lin);王澤仁(Z. R. Wang) 117-123
The Development of the Fe-Al-Mn Steel for the Dies and Rollers of the Pelletizing Machine |
2001 Sep. vol. 33 issue 3 |
1 |
高分子添加量對瀝青工程性質之影響 / 陳建旭(J. S. Chen);蔡攀鰲(P. A. Tsai);蔡長展(C. J. Tsai);廖敏志(M. C. Liao) 125-135
Effect of Polymer Concentration on Engineering Properties of Asphalt Binder |
2 |
氮化鎵乾式蝕刻技術(ICP-RIE)之研究 / 張連壁(L. B. Chang);劉書史(S. S. Liu) 136-142
On The Study of GaN Dry Etching by Using Inductively Coupled Plasma |
3 |
使用銀基填料硬銲接合鈹銅及304不鏽鋼之研究 / 陳瑞斌(R. B. Chen);薛人愷(R. K. Shiue);張吉本(C. B. Chang) 143-151
The Study of Brazing Beryllium Copper and 304 Stainless Steel Using a Silver Base Braze Filler |
4 |
Cu-Ni-Sb低合金完軋鋼板撕裂成因探討 / 張耀南(Y. N. Chang);謝榮淵(R. I. Hsieh) 152-159
Investigation of Surface Cracking of a Cu-Ni-Sb As-Rolled Low Alloy Steel Plate |
5 |
低溫共燒Pyrex硼矽玻璃的結晶動力學及其機構 / 方友清(Y. C. Fang);簡朝和(J. H. Jean) 160-165
Devitrification Kinetics and Mechanism of Low Temperature Cofirable Pyrex Borosilicate Glass |
6 |
氧化鋁/鎳複合材與氧化鋁/鎳/氧化鋯複合材的氧化行為 / 王德純(T. C. Wang);段維新(W. H. Tuan) 166-170
The Oxidation Behavior of Al2O3/Ni and Al2O3/(ZrO2+Ni) Composites |
7 |
添加氧化鋁粉末對鋯英砂—高嶺土反應燒結系統之影響研究 / 謝侑縈(Y. Y. Hsieh);段維新(W. H. Tuan) 171-177
A Study on the Reaction Sintering of Kaolin-Zircon-Alumina Systems |
8 |
陶瓷材料微結構特徵之影響輔助分析 / 謝錦隆(C. L. Hsieh);段維新(W. H. Tuan) 178-183
Image Processing and Analysis of Ceramic Microstructure |
9 |
均勻度及Nd對Ba2Ti9O20相生成之影響 / 王宏文(H. W. Wang);鍾明蓉(M. R. Chung);林孟萱(M. S. Lin) 184-188
Effect of Homogeneity and Nd on the Phase Formation of Ba2Ti9O20 Ceramics |
10 |
化學溶液法及氧化物混合法加鈣製備Nd2Ti3O8.7介電陶瓷 / 王宏文(H. W Wang);陳鼎文(T. W. Cheng);詹佩誼(P. S. Chan) 189-193
Preparation of Nd2Ti3O8.7 Dielectric Ceramics by Chemical Solution Methods and Mixed-Oxide with Calcium |
2001 Dec. vol. 33 issue 4 |
1 |
預測不均勻各向異性材料有效彈性模量的一個新公式 / 鄭茂盛(M. Zheng);周根樹(G. Zhou);何家文(J. He);徐可爲(K. Xu) 195-199
A New Approach for Predicting Effective Elastic Moduli of Inhomogeneous and Anisotropic Material |
2 |
KelarSilicone Rubber/Polyurethane/Epoxy三相摻合高分子材料之動態性質防振及防振性能之研究 / 邱顯堂(H. T. Chiu);邱士軒(S. H. Chiu);吳志宏(J. H. Wu);葛光祥(G. S. Ger) 200-208
The Dynamic Properties of Rubber Vibration Isolators and anti-vibration Performance of Kevlar Fiber Reinforced Silicone Rubber/Polyurethane/Epoxy Blends |
3 |
γ→α-Fe2O3相轉換過程晶徑變化對微粒α-Fe2O3合成之影響 / 楊建民(Y. M. Yang);陳威倩(W. C. Chen);洪辰宗(C. Z. Hong);顏富士(F. S. Yen) 209-215
Characterization of the Crystal Size Change in γ to α-Fe2O3 Phase Transformation |
4 |
潤滑劑對鐵及不鏽鋼粉末成形製程之影響。Ⅰ.粉末之填充特性 / 林育全(Y. C. Lin);黃坤祥(K. S. Hwang) 216-222
Effect of Lubricant on Powder Properties and Compacting Performance of Iron and Stainless Steel Powders. Ⅰ, Powder Properties |
5 |
潤滑劑對鐵及不鏽鋼粉末成形製程之影響。Ⅱ.成形特性 / 林育全(Y. C. Lin);黃坤祥(K. S. Hwang) 223-232
Effect of Lubricant on Powder Properties and Compacting Performance of Iron and Stainless Steel Powders. Ⅱ, Compacting Performance |
6 |
摩擦配向對垂直配向模式ECB彩色液晶顯示元件光電特性之影響 / 張嘉倫(C. L. Chang);楊程專(C. C. Yang);蔡瑋玲(W. L. Tsai);李俊毅(J. Y. Lee) 233-238
Rubbing Effect on Electro-Optic Characteristics of Homeotropic Alignment for the ECB Color Liquid Crystal Display |
7 |
以感應耦合電漿二階段深度蝕刻氮化鎵 / 劉書史(S. S. Liu);張連璧(L. B. Chang);鄭明哲(M. J. Jeng) 239-246
Short Time and Two-step Deep Etching of GaN in BCl3/Ar/N2 Using Inductively Coupled Plasma |
8 |
以微波加熱化學氣相沉積法成長奈米碳管之催化劑影響 / 楊佩玲(P. L. Yang);周正賢(C. T. Chou);黃金花(J. H. Huang);林樹均(S. J. Lin);林諭男(I. N. Lin) 247-252
Effect of Catalysts on the Growth of Carbon Nanotubes Using Microwave Heating CVD |
2002 Mar. vol. 34 issue 1 |
1 |
濺鍍銅膜之氧化行為研究 / 敖仲寧(J. N. Aoh);莊正利(C. L. Chuang);丁榮豐(R. F. Din);童山(S. Torng);林德昇(D. S. Lin) 1-7
On the Oxidation Behavior of Sputtered Copper Film on Si Wafer |
2 |
覆晶銲錫凸塊電鍍製程模擬分析與實驗印證 / 詹益淇(Y. C. Chan);苗志銘(J. M. Miao);王宣勝(S. S. Wang);莊東漢(T. H. Chuang) 8-16
Simulation Analysis and Experimental Verification of Electroplating Process for Flip-Chip Solder Bumps |
3 |
質子交換複合膜Nafion®/SiO2之製備與特性研究 / 曹金萍(J. P Tsao);林智汶(C. W. Lin) 17-26
Preparations and Characterizations of the Nafion(superscript ®)/SiO2 Proton Exchange Composite Membrane |
4 |
鐵基形狀記憶合金抗沖蝕性之研究 / 林昆明(K. M. Lin);林新智(H. C. Lin);劉珉（女勻）(M. J. Liu);陳彥伸(Y. S. Chen);周棟勝(T. S. Chou) 27-36
A Study on Erosion Resistance of Fe-based Shape Memory Alloys |
5 |
410麻田散鐵系不銹鋼的表面改質處理 / 陳永傳(Y. C. Chen);白鈞文(C. W. Pai) 37-48
The Surface Modification Treatment of 410 Stainless Steel |
6 |
二氧化錫薄膜由溶膠—凝膠至薄膜之微結構演變 / 陳溪山(C. S. Chen);黃炳淮(B. H. Hwang);許子建(T. C. Hsu);盧宏陽(H. Y. Lu) 49-54
Microstructure Evolution of sol-gel to SnO2 Thin Film |
7 |
在底層電極上以常溫成長氮化鋁薄膜之研究 / 黃靜茹(J. L Hwang);黃興祿(H. L. Huang);陳亮斌(L. B. Chen);謝光宇(K. Y. Hsieh) 55-60
The Study of AIN Thin Film Grown on Bottom Electrode under Room Temperature Condition |
8 |
具導電性之氮化鈦—氮化矽複合材料的加工與特性研究 / 劉見成(C. C. Liu);黃肇瑞(J. L. Huang) 61-65
Manufacture and Properties of Electro-Conductive TiN-Si3N4 Particulate Composites |
2002 Jun. vol. 34 issue 2 |
1 |
射頻磁控濺鍍沉積Pb(Mg1/3Nb2/3)O3薄膜 / 李中夏(C. H. Lee);吳孟韋(M. W. Wu);李英翰(Y. H. Lee);李后偉(H. W. Lee) 67-72
R. F. Magnetron - Sputter Deposition of Pb(Mg1/3Nb2/3)O3 Thin Films |
2 |
IC晶片散熱器微小通道的成型與接合 / 莊東漢(T. H. Chuang);陳炳輝(P. H. Chen);曾乙修(Y. H. Tseng);曹龍泉(L. C. Tsao);王宣勝(S. S. Wang);張世穎(S. Y. Chang);張立信(L. S. Chang) 73-78
Forming and Bonding Microchannels for the Manufacture of IC Chip Heat Dissipators |
3 |
射頻磁控濺鍍氧化鎳薄膜電性及光電之研究 / 盧陽明(Y. M. Lu);楊哲勛(J. S. Yang);黃文星(W. S. Hwang);莊鑫堅(H. C. Chuang) 79-84
Electrical and Optical Characterizations of NiO Thin Film Prepared by RF Magnetron Sputtering |
4 |
材料中損傷癒合的熱動力學分析及裂紋癒合過程的原位觀察 / 柴東朗(D. L. Chai);沈亞鵬(Y. P. Shen) 85-92
The Analysis of Thermodynamic Condition on Damage Healing in Materials and in Situ Observation of Crack Healing Process
|
5 |
界面活性劑對氧化鋁粉末射出成形流變行為之影響 / 余華偉(H. W. Yu);黃國鋒(K. F. Huang);黃啟祥(C. S. Hwang) 93-99
Effect of Surfactant on Rheological Behavior of Alumina Powder Injection Moldin
|
6 |
超微粒徑鑭系鈣鈦礦結構粉末之製備及其特性 / 黃玉婷(Y. T. Huang);翁鴻山(F. S. Wang);林淑萍(S. P. Lin);黃啟祥(C. S. Hwang) 100-106
Preparation and Characteristics of Ultra-fine Powders Composed of La-family in a Perovskite-type Structure
|
7 |
多孔質陶瓷濾材之製作與特性研究 / 陳智成(C. C. Cheng);王振興(J. S. Wang);林文豪(W. H. Lin);顏富士(F. S. Yen) 107-111
Preparation and Characterization of Porous Ceramic Filter
|
8 |
鎳膜厚度對奈米碳管的結構與場發射特性之影響 / 莊佳智(C. C. Chuang);黃金花(J. H. Huang);莊鎮宇(Z. Y. Juang);蔡春鴻(C. H. Tsai);陳世溥(S. P. Chen);林諭男(I. N. Lin) 112-116
The Effect of Nickel Thickness on the Structure and Field-emission Properties of Carbon Nanotubes
|
9 |
利用Sol-Gel製備不同摻雜位置的改良型鈦酸鉛鐵電薄膜與鐵電性質的差異 / 周嘉峰(C. F. Chou);王秋源(Vincent C. Y. Wang);周振嘉(C. C. Chou) 117-122
Preparation of Modified Lead Titanate Ferroelectric Thin Films Using a Sol-gel Process and Their Ferroelectric Properties
|
10 |
鈦酸鈣鉛陶瓷隨電場及負載之原位X光繞射分析 / 何何智翔(C. H. Ho);鄭忠正(C. C. Cheng);周振嘉(C. C. Chou) 123-133
In - Situ X-ray Analysis of Calcium - Modified Lead Titanate Ceramic under Electric Field and Mechanical Stress
|
11 |
鈦酸鈣鉛陶瓷序化結構之微觀分析 / 蘇益緯(I. W. Su);王友志(Y. C. Wang);周振嘉(C. C. Chou) 129-133
Ordering Microstructure Analysis of Calcium - Modified Lead Titanate Ceramic |
2002 Sep. vol. 34 issue 3 |
1 |
Sn-9Zn-xAg無鉛銲席錫合金的熱膨脹係數與熔融區間之量測研究 / 蔡映麟(Y. L. Tsai);黃文星(W. S. Hwang);王惠森(H. S. Wang) 135-143
Measurements of Thermal Expansion Coefficients and Melting Range for Sn-9Zn-xAg Lead-free Solder Alloys |
2 |
利用實驗設計法分析氧化鋁燒結參數之影響 / 王博祺(P. C. Wang);韋文誠(W. J. Wei);劉國忠(K. C. Lu) 144-152
Statistic Analysis of Sintering Parameters of Al2O3 by Experimental Design |
3 |
以3,3'-二硝基二苯胺合成聚(苯并咪唑-醯胺-醯亞胺)共聚合體其合成之研究 / 汪輝雄(H. H. Wang);吳樹屏(S. P. Wu) 153-164
Synthesis of Poly (benzimidazole-imide-amide) Copolymers Based on 3,3'-dinitrobenzidine |
4 |
θ-氧化鋁微粉在α-相變過程的燒結特性分析 / 顏富士(F. S. Yen);張俊龍(J. L. Chang);游佩青(P. C. Yu) 165-172
Sintering Characteristics of Theta-Alumina Powders During Alpha-Phase Transformatio |
5 |
以氧氣感測器控制氣體滲氮之可行性研究 / 蔡居正(C. C. Tsai);李明彥(M. Y. Lee);陳永傳(Y. C. Chen) 173-178
A Study on White Layer Control in Gas Nitriding Process Using an Oxygen Senso |
6 |
二氧化鈰奈米微粉之合成 / 陳慧英(H. I. Chen);黃琬婷(W. T. Huang);林育右(Y. Y. Lin) 179-184
Preparation of Ultra-Fine Cerium Dioxide Powder |
7 |
回火對鑽石薄膜表面特性之分析研究 / 黃柏仁(B. R. Huang);陳貴賢(K. H. Chen);許榮富(J. F. Hsu);林聖橫(S. C. Lin);陳法偉(F. W. Chen) 185-189
The Annealing Effect on the Surface Properties of the Free - Standing Diamond Films |
8 |
電鑄Ni-P合金微凸塊技術研究 / 李仁智(J. C. Li);葛明德(M. D. Ger);王樂民(L. M. Wang);柯世宗(S. T. Ke);宋鈺(Y. Sung);陳長慶(C. C. Chen) 190-193
Electrodepositing Ni - P Microbumps Technology |
2002 Dec. vol. 34 issue 4 |
1 |
影像能譜技術應用於銅金屬化製程內低介電常數材料之介電性質量測 / 羅聖全(S. C. Lo);開執中(J. J. Kai);陳福榮(F. R. Chen) 195-207
Image - Spectrum Technique: The Investigation of Dielectric Properties of Low – k Materials for Copper Metallization |
2 |
熔融還原煉鐵法製程條件對鐵渣混合影響之水模研究 / 周兆民(J. M. Chou);莊名超(M. C. Chuang);黃文星(W. S. Hwang);葉孟恆(M. H. Yeh);劉世賢(S. H. Liu);蔡辛慈(H. X. Cai);王惠森(H. S. Wang) 208-218
Study of the Effects of Process Condition on Mixing Between Molten Iron and Slag in Smelting Reduction Vessel by Water Model |
3 |
聚氨基甲酸酯-醯胺共聚合體之物性及染色性研究 / 汪輝雄(H. H. Wang);林里燕(L. E. Lin) 219-230
Physical and Dyeing Properties of Poly (urethane-amide) Copolymers |
4 |
表面聲波濾波器的設計準則 / 蔡世鴻(S. H. Tsai);湯譯增(I. T. Tang);洪茂峰(M. P. Houng);王永和(Y. H. Wang) 231-238
A Design Rule of Surface Acoustic Wave Filter
|
5 |
磁性奈米碳球與奈米複合材料之合成 / 陳承斌(C. P. Chen);張添喜(T. H. Chang);王財福(T. F. Wang) 239-245
Synthesizing Magnetic Carbon Nano-Capsules and Nano-COmposites
|
6 |
氮化鉻鍍膜的相變化研究 / 陳弘穎(H. Y. Chen);呂福興(F. H. Lu) 246-250
Phase Transformation in CrN Films
|
7 |
化學鍍非均溫析鍍行為研究 / 宋鈺(Y. Sung);程德輝(D. H. Chung);葛明德(M. D. Ger);王樂民(L. M. Wang) 251-254
Plating Behavior of Nonhomogeneous Heating Deposition for Ni - P Alloy
|
8 |
入口流速對MOCVD反應室內氣體分佈的影響 / 林惠娟(H. J. Lin);柳逸斌(I. B. Liu) 255-260
The Influence of Flow Rate on Gas Distribution in MOCVD Chamber
|
9 |
披覆含鉻質硬層之鐵猛鋁合金鋼耐腐蝕性與關鍵機械性質測量 / 李志偉(J. W. Lee) 261-266
Critical Mechanical Properties and Corrosion Resistance Measurement of Fe - Mn - Al Alloy Steel with Chromium Hard Coating
|
10 |
脈衝電鑄條件對Ni-P合金中P含量及硬度之影響 / 柯世宗(S. T. Ke);葛明德(M. D. Ger);胡文華(W. H. Hwu);李九龍(J. L. Lee) 267-271
The Influence of Pulsed Electroforming on the Phosphorus Content and Hardness of Ni - P Alloy
|
11 |
碳化矽奈米粉末於去離子水中之帶電性研究 / 鍾清枝(T. T. Tsung);黃清安(T. A. Huang);張合(H. Chang);盧晏君(Y. J. Lu);鍾介文(J. W. Tsng) 272-276
An Investigation of the Electrified Property for SiC Nano - Powder in Distilled Water |
12 |
電鑄槽參數對噴孔片上微噴孔成型時尺寸偏差之影響 / 曹碧珍(P. C. Taso);周淑金(Y. C. Chou);周雅靜(S. C. Chou);葉信宏(S. H. Yeh);顏佳瑩(Y. J. Ying) 277-281
The Effects of Electroforming Parameters for Nozzee Plate |
2003 Mar. vol. 35 issue 1 |
1 |
基板加熱對濺鍍TaN薄膜微結構及電性之影響 / 盧陽明(Y. M. Lu);翁睿哲(R. J. Weng);黃文星(W. S. Hwang) 1-4
Effects of Substrate Temperature on the Electrical Properties and Microstructure of Sputtered TaN Films |
2 |
熔融還原煉鐵用Al2O3-SiC-C及Al2O3-TiO2-C耐火材料之熔蝕研究 / 許家展(C. C. Hsu);游善溥(S. P. Yu);洪敏雄(M. H. Hon);王木琴(M. C. Wang);李育成(Y. C. Li);邵靖衡(C. H. Shao) 5-10
Slag Corrosion Resistance of Al2O3-SiC-C and Al2O3-TiO2-C Refractory Bricks for Direct Iron Ore Smelting Reduction Process |
3 |
反應粉末大小及形狀對自行傅播燃燒反應之影響 / 李弘斌(H. P. Li) 11-23
The Influence of the Reactant Size and Shape on Combustion Synthesis |
4 |
純直流及非對稱雙極脈衝直流離子氮化金屬鈦之研究 / 陳克昌(K. C. Chen);葉通迪(T. D. Yeh);林嘉彥(C. Y. Lin);何主亮(J. L. He) 24-30
A Comparative Study of Pure D.C. and Asymmetric Bipolar Pulsed D.C. Ion Nitriding of Titanium Metal
|
5 |
控制電漿位置以成長類鑽奈米尖錐 / 林啓瑞(C. R. Lin);周上智(S. C. Chou);洪新欽(H. C. Hung);許庭瑋(T. W. Hsu) 31-35
Deposition of Nano Diamond-like Tip by Plasma Position Controlling
|
6 |
奈米級粉體超高音速成長(Pb, Ca)TiO3厚膜之研究 / 王譯慧(Y. H. Wang);許弘璋(H. C. Hsu);許清淵(C. I. Sheu);張宏宜(H. Y. Chang);鄭世裕(S. Y. Cheng) 36-40
Study on (Pb,Ca) TiO3 Thick Film Deposited by Supersonic Jet Nano-powder
|
7 |
化學法合成奈米晶型鎂橄欖石纖維及其特性 / 蔡木村(Mu-Tsun Tsai) 41-45
Synthesis and Characterization of Nanocrystalline Forsterite Fiber
|
8 |
鋯鈦酸鉛梯度鐵電薄膜極化位移現象之Slater理論解釋 / 張正義(C. Y. Chang);雷健明(C. M. Lei);曹佑民(Y. M. Tsau);陳宜君(Y. C. Chen);鄭秀鳳(H. F. Cheng) 46-51
Applying Slater Model to Explain the Phenomenon of Polarization Displacement of PZT Graded Ferroelectric Films
|
9 |
鋯鈦酸鉛薄膜電滯曲線的巨觀分析 / 蔡竑名(H. M. Tsai);陳宜君(Y. C. Chen);鄭秀鳳(H. F. Cheng) 52-57
Macroscopic Analysis on Hysteresis Loops of the Pb1.1Zr0.52Ti0.48O3 Film
|
10 |
奈米晶界高介電積體化薄膜電容之研究 / 許清淵(C. I. Sheu);張宏宜(H. Y. Chang);鄭世裕(S. Y. Cheng) 58-63
Study on Nano-grain Boundary-high Dielectric Integrated Thin Film Capacitor
|
11 |
煆燒二氧化鈦奈米粉末對其光催化活性影響之研究 / 魏碧玉(B. Y. Wei);林鴻明(H. M. Lin);高至鈞(C. C. Kao);栗愛綱(A. K. Li) 64-69
Effect of Calcination on Photocatalytic Activity of TiO2 Nanopowders |
12 |
改質型奈米磷酸鋯層材之合成研究 / 黃芝蘭(C. L. Hwang);蔡宗燕(T. Y. Tsai);陳國龍(G. L. Chen) 70-73
Study on Synthesis of Modified Nanozirconium Phosphate Layered Material |
2003 Jun. vol. 35 issue 2 |
1 |
人工陶瓷股小球之材料及機械性質評估 / 高鴻展(H. C. Kao);韋文誠(W. J. Wei);鄭誠功(C. K. Cheng) 75-82
Evaluation of Material and Mechanical Properties of Synthetic Ceramic Femoral Heads |
2 |
部分還原氧化鎳－氧化釔安定化氧化鋯陶金之製備與分析 / 楊志忠(C. C. T. Yang);韋文誠(W. C. J. Wei) 83-90
Fabrication and Characterization of Partially Reduced NiO-YSZ Cermets |
3 |
鋼鐵連鑄製程之扁鋼胚鋼液分配器設計對流體流動與介在物移除現象之影響 / 范志銘(C. M. Fan);謝榮晉(R. J. Shie);黃文星(W. S. Hwang) 91-100
Fluid Flow and Inclusion Removal in Various FCD Designs of Slab Tundish of Continuous Casting Processes of Steel |
4 |
混合兩種晶徑θ-Al2O3粉末對θ→α-Al2O3相轉換之影響 / 游佩青(P. C. Yu);顏富士(F. S. Yen) 101-107
The Effect of Mixing Coarse and Fine θ-Al2O3 Powders on θ→α-Al2O3 Phase Transformation
|
5 |
中孔奈米晶型二氧化錫之製備 / 吳乃立(C. Y. Tung);董建岳(N. L. Wu) 108-112
Synthesis of Mesoporous Tin Oxide by Supramolecule-Templating of Hydrous Sol
|
6 |
電化學沉積鎳奈米線的成長特性研究 / 顏榮賢(J. H. Yen);林建志(C. C. Lin);呂英治(I. C. Leu);洪敏雄(M. H. Hon) 113-116
Growth Characteristics of Electrodeposition of Ni Nanowires
|
7 |
添加前驅物的電弧放電法合成奈米碳管的研究 / 林景正(M. C. C. Lin);賴宏仁(H. J. Lai);楊明輝(M. H. Yang);江柏風(B. F. Jiang);溫志中(J. C. Wen);栗愛綱(A. K. Li) 117-120
Synthesis of Carbon Nanotube with Precursor by Arc Discharge
|
8 |
脈衝電鑄奈米級鎳鐵合金特性與微結構研究 / 葉翳民(Y. M. Yeh);涂肇嘉(G. C. Tu);何佩蓉(P. R. Ho) 121-126
A Study of the Microstructure and nano-mechanical Properties of the Ni-Fe Alloy by Pulse Electroforming
|
9 |
碳化矽鋸線的無電鍍鎳共鍍特性 / 李世欽(S. C. Lee);戴豐成(F. C. Tai) 127-129
The Co-plating Properties of SiC Sawing Wire by EN
|
10 |
奈米類鑽尖錐薄膜之特性與場發射性質之研究 / 林啓瑞(C. R. Lin);洪新欽(H. C. Hung);周上智(S. C. Chou);陳冠彰(K. C. Chen) 130-134
Characterization and Field Emission Properties of Nano-tip Diamond-like Carbon Films
|
2003 Sep. vol. 35 issue 3 |
1 |
具耐鹼性且可與反應性染料結合之水性聚氨基甲酸酯聚合體 / 汪輝雄(H. H. Wang);林憶昌(Y. T. Lin) 135-145
An Water-borne Polyurethane with Alkali Resistance and Covalent Bond of Reactive Dye |
2 |
物理氣相沈積截面型態之數值模擬 蔡名詔(M. J. Tsai);翁睿哲(R. J. Weng);張瓊丹(C. D. Chang);黃文星(W. S. Hwang) 146-152
Simulation of Thin Film Cross Sectional Morphology for PVD Process |
3 |
衛生陶瓷劣化破裂之探討 李信義(S. Y. Lee);余宣鋒(S. F. Yu);韓雄文(H. W. Han) 153-159
The Degradation Behavior of Sanitaryware |
4 |
過量添加氧化鋯對反應燒結製備鎢酸鋯陶瓷影響之研究 / 溫惠玲(H. L. Wen);謝烱勳(C. H. Hsieh);林永生(Y. S. Lin) 160-166
Excess ZrO2 Effects on the Reaction Sintering and Coefficient of Thermal Expansion of Zirconium Tungstate Ceramics |
5 |
Ti-40Al-10Nb鈦鋁介金屬合金之潛變行爲 / 楊錦添(C. T. Yang);于作浩(T. H. Yu);顧鈞豪(C. H. Koo) 167-181
Creep Behaviors of Ti-40Al-10Nb Titanium Aluminide Intermetallic Alloy |
6 |
添加硼元素於ZrAlCuNi塊狀合金之結晶行爲探討 / 鄭憲清(Jason S. C. Jang);洪子翔(T. H. Hong);張量然(L. J. Chang) 182-186
Crystallization Behavior of a ZrAlCuNi Bulk Amorphous Alloy Doped with Boron |
7 |
奈米鑽石之紅外線光譜研究 / 陳啓峰(C. F. Chen);鄭嘉良(C. L. Cheng);吳慶成(C. C. Wu) 187-192
Infrared Spectroscopic Studies of Nanocrystal Diamonds |
8 |
銅基材鍍鎳在鹽水中耐蝕性之研究 / 楊齡慧(L. H. Yang);周孟鋒(M. F. Jou);楊聰仁(T. J. Yang) 193-198
Corrosion Resistance of Nickel-Plated Copper in NaCl Aqueous Solution |
2003 Dec. vol. 35 issue 4 |
1 |
巨磁阻讀取磁頭元件之奈米分析 / 黃榮潭(R. T. Huang);江正誠(C. C. Chiang);林智仁(C. J. Lin);陳福榮(F. R. Chen);開執中(J. J. Kai) 199-206
Nanoanalyses of GMR Read Head Device |
2 |
應用田口動態實驗法開發電子束表面硬化加工之穩健製程技術 / 簡明德(M. D. Jean);曾義豐(Y. F. Tzeng) 207-216
Robust Design of Electron Beam Surface Hardening Process Using Taguchi Dynamic Experimen |
3 |
壓電式噴墨系統之液滴噴射行爲模擬 / 吳鉉忠(H. C. Wu);郭永吉(Y. C. Kuo);林惠娟(H. J. Lin);黃文星(W. S. Hwang) 217-224
Simulation of the Droplet Ejection Process of a Piezoelectric Inkjet Printhead |
4 |
不銹鋼在含氯離子水溶液之孔蝕性研究 / 蒲志桔(C. C. Pu);葉威德(W. D. Yeh);吳建國(J. K. Wu) 225-230
Pitting Corrosion Resistance of Stainless Steels in Chloride-Containing Solutions |
5 |
聚丙烯不織布與感溫水膠的複合化及表面固定多孔性明膠生解材 / 陳克紹(K. S. Chen);蔡瑞哲(J. C. Tsai);林峰輝(F. H. Lin);陳天牧(T. M. Chen);伍德馨(T. H. Wu);陳家杰(C. C. Chen) 231-239
The Study of PP Nonwoven Composite Combined with Thermo-sensitive Hydrogel and Immobilized Biodegradable Material onto Its Surface |
6 |
聚胺基甲酸酯與黏土奈米複合材料的合成與性質 / 王宗櫚(Tzong-Liu Wang);黃芳榮(Fang-Jung Huang);黃柏豪(Po-Hao Huang);陳建文(Chien-Wen Chen) 240-244
Synthesis and Properties of Polyurethane/Clay Nanocomposites |
7 |
SiO2單分散粉體之合成 / 李紀平(C. P. Li);張俊賢(J. S. Chang);林唯芳(W. F. Su) 245-249
Synthesis of Monodisperse Silica Particles |
8 |
以溶膠－凝膠法製備奈米級YxZr1-xO2-x/2粉末於化學機械研磨上應用 / 蘇旺申(W. S. Su);涂肇嘉(G. C. Tu);蔡明蒔(M. S. Tsai);黃銘賢(M. H. Huang) 250-255
Sol-gel Synthesis and Characterization of YxZr1-xO2-x/2 Nanopowders for CMP Application |
9 |
7005/Al2O3(P)鋁基複合材料鍍銅行爲研究 / 林景崎(J. C. Lin);鄭文達(W. D. Jehng) 256-261
Plating of Copper on An 7005/Al2O3(P) Metal Matrix Composite |
10 |
正負半週期電量對交流電解粗化鋁板表面形貌與性質之影響 / 邱吉成(C. C. Chiu);李佳盈(C. Y. Lee);林招松(C. S. Lin) 262-270
Effect of Positive/Negative Charge Ratio on the Surface Morphology and Properties of AC Electrograined Aluminum Plate |
2004 Mar. vol. 36 issue 1 |
1 |
應用田口方法於紫外原型件成型技術精敏化之研究 / 陳延昌(C. Y. Chen);史雷(L. Shih);李世榮(S. R. Lee);邱弘興(H. S. Chiou) 1-15
Research in Precision and Speed of Ultraviolet Rapid Prototyping Technology with Taguchi Method |
2 |
氧化鋁微粉及其壓實體之θ至α相轉換過程之比較 / 李玄閔(S. M. Lee);錢敬峰(J. F. Chian);黃啟原(C. Y. Huang) 16-22
Comparison of θ→α Phase Transformation in Al2O3 Fine Powder and Its Compact |
3 |
TIG-Flux 銲接製程參數研究 / 黃和悅(H. Y. Huang);徐享文(S. W. Shyu);曾光宏(K. H. Tseng);周長彬(C. P. Chou) 23-30
Study of the Process Parameters on TIG-Flux Welding |
4 |
高導電率之透明氧化鋅薄膜的濺鍍製程參數最佳化 / 張振旻(C. M. Chang);蔡淑儀(S. I. Tsai);衛祖賞(T. S. Wey);盧陽明(Y. M. Lu);黃文星(W. S. Hwang) 31-35
Optimization of Sputtering Parameters for High Conductive and Transparent Zinc Oxide Films |
5 |
René77合金渦輪噴嘴鑄件表面狀況及擺放方式對氣相鋁化鍍層品質之影響研究 / 何堃森(K. S. Ho);黃文星(W. S. Hwang);曾清暉(C. H. Tseng) 36-47
Effects of Surface Condition and Part Orientation on the Quality of Vapor Phase Aluminized Coating for Nozzle Segment Casting of René77 Alloy |
6 |
電鑄條件對鎳鎢合金性質的影響 / 李九龍(J. L. Lee);葛明德(M. D. Ger);王多美(D. M. Wang);詹仕源(S. Y. Zhan);李仁智(J. C. Li) 48-52
The Effect of Electroforming Operation Conditions to Ni-W Coating |
7 |
電漿噴焊氫氧基磷灰石材料之模擬體液研究 / 龔素芳(S. F. Kung);蕭威典(W. T. Hsiao);許毅中(I. C. Hsu);吳國梅(G. M. Wu) 53-58
Plasma Spray of Hydroxyapatite: A Simulated Body Fluid Study |
8 |
以微波電漿化學氣相沉積法在鑽石緩衝層上成長立方氮化硼薄膜 / 楊天賜(T. S. Yang);賴哲永(J. Y. Lai);翁明壽(M. S. Wong) 59-63
Growth of Cubic Boron Nitride Films on Diamond Buffer Layers via MPCVD |
9 |
鎢粉與鈦粉之無電鍍銅研究 / 吳貞欽(J. C. Wu);姜智豪(C. H. Chian) 64-69
The Study on the Electroless Copper Plating of Tungsten and Titanium Powders |
2004 Jun. vol. 36 issue 2 |
1 |
以氧化鋅中介層增進氧化鋁薄膜的結晶性及光學性質 / 林素霞(S. S. Lin);黃肇瑞(J. L. Huang) 71-78
Improved Crystallinity and Optical Properties of AlOx Thin Films by a ZnO Iinterlayer |
2 |
平面顯示器用鋁合金靶材鍍膜特性之研究 / 陳家驊(C. H. Chen);黃信二(H. E. Huang);王漢能(H. N. Wang);李訓杰(S. J. Lee); 葉建宏(C. H. Yeh) 79-85
Characteristic of Sputtering Thin Film of Al Alloy Target for Liquid Crystal Display |
3 |
微型噴墨三維模擬系統之開發及其實驗驗證 / 吳鉉忠(H. C. Wu);黃文星(W. S. Hwang);林惠娟(H. J. Lin) 86-97
Development of a Three-Dimensional Simulation System for Micro-Inkjet and Its Experimental Verification |
4 |
奈米碳管強化鋁基複合材料之機械性質研究 / 張智評(Z. P. Chang); 康永昌(Y. C. Kang); 陳立業(S. L. I. Chan) 98-105
Mechanical Properties of Carbon Nanotube Reinforced Aluminum Composite |
5 |
溶膠－凝膠旋轉塗佈氧化鋁於AISI 440C不銹鋼之研究 / 張正君(C. C. Chang);顏秀崗 (S. K. Yen);游憲一 (H. I. You );宋子豪(T. H. Sung) 106-110
Studies on Preparation of Al2O3 Coatings on AISI 440C Stainless Steel by Sol-gel Spinning Method |
6 |
可直接淬火之固體粉末滲鉻法 / 卓文彬(W. P. Cho);江國安(K. A. Chian);陳永傳(Y. C. Chen) 111-115
A Powder Chromizing Process with the Advantage of Direct Quenching |
7 |
電漿化學氣相沉積奈米碳纖維成長特性 / 林建志(C. C. Lin);顏榮賢(J. H. Yen);呂英治(I. C. Leu);洪敏雄(M. H. Hon) 116-120
Growth Characteristics of Carbon Nanofibers Prepared by Plasma Enhanced Chemical Vapor Deposition |
8 |
添加前驅物的電弧放電法合成奈米碳管的研究 / 林景正;(C. C. Lin); 賴宏仁(H. J. Lai); 楊明輝(M. H. Yang);江柏風(B. F. Jiang);溫志中(J. C. Wen); 栗愛綱(A. K. Li) 121-124
Synthesis of Carbon Nanotube with Precursor by Arc Discharge |
9 |
奈米材料之X光吸收光譜檢測與分析 / 李明宗(M. T. Lee );林中魁 (C. K. Lin);林鴻明(H. M. Lin );鍾清枝3(T. T. Tsung) 125-129
Investigation and Characterization of Nanocrystalline Materials by X-ray Absorption Spectroscopy |
10 |
奈米級矽酸膠表面改質之研究 / 蔡明雄(M. S. Tsai);林憶如(Y. J. Lin);李淑杏(S. H. Lee);王蕾蕾(L. L. Wang) 130-133
The Study of Surface Modification of Nano Colloidal Silica |
11 |
利用熱燈絲化學氣相沈積法研究奈米碳管之成長 / 施政宏(T. H. Shi);鄭凱文(K. W. Cheng);馬遠榮(J. Z. Ma);翁明壽(M. S. Wong) 134-137
Growth of Carbon Nanotubes Via Hot-Filament CVD |
2004 Dec. vol. 36 issue 4 |
1 |
雷射銲接技術去除薄金屬構件中缺陷之研究 / 楊子青(T. C. Yang);吳憲政(H. C. Wu);陳鈞(C. Chen) 195-202
Investigation of Removing Defects in Thin Metal Components by Laser Welding Technique |
2 |
Cr2O3/CrN超硬複層膜之耐鋁湯熱損性研究 / 何偉友(W. Y. Ho);許正勳(C. H. Hsu);黃東浩(T. H. Huang) 203-209
An Investigation of Thermal Loss of Cr2O3/CrN Duplex Coatings Corroded by Molten Aluminum |
3 |
應用類神經網路模擬微銲被覆表面之製程發展分析 / 簡明德(Ming-Der Jean) 210-222
Development and Analysis of the Surface Microwelding Hardfacing Process Using Artificial Neural Network |
4 |
尼龍6纖維以過氧化氫／乙二醛在低溫行氧化還原染色之機構與模型 / 汪輝雄(Huei-Hsiung Wang);王權泉(Chyung-Chyung Wang) 223-235
The Dyeing Mechanism and the Model of Nylon 6 Fiber Dyeing in the Low Temperature Hydrogen Peroxide-Glyoxal Redox System |
5 |
使用不同混煉機構製備均勻氧化鋯射出胚料之研究 / 吳榮源(R. Y. Wu);韋文誠(W. J. Wei) 236-247
Study on the Preparation of Homogenous Zirconia Feedstocks by Various Kneading Mechanisms |
6 |
擠製參數對6463鋁合金有縫管擠製接合效應之影響 / 吳泓瑜(H. Y. Wu);陳正源(J. Y. Chern);柯秉辰(B. C. Ke);涂肇嘉(C. J. Tu) 248-256
Influence of Extrusion Variables on Bonding Effect of Hollow Shaped 6463 Aluminum Alloy |
2005 Mar. vol. 37 issue 1 |
1 |
CrN/Cr (N,O)複合鍍膜之製程與特性研究 / 許正勳(C. H. Hsu);黃東浩(T. H. Huang);何偉友(W. Y. Ho) 1-7
Study on Process and Characteristics of CrN/Cr (N, O) Duplex Coatings |
2 |
氮化鈦/氮化鋁奈米多層膜在電路板微鑽孔應用之研究 / 姚舜暉(S. H. Yao);高文顯(W. H. Kao);蘇演良(Y. L. Su);劉醇鴻(T. H. Liu);劉伍健(W. C. Liu) 8-15
Application of TiN/AIN Nano-multilayer Films on Circuit Board Micro-drilling |
3 |
Neoprene乳膠對於NR/BR摻合膠與織物接著之研究 / 邱顯堂(Hsien-Tang Chiu);蔡培安(Peir-An Tsai) 16-22
A Study of Adhesion of NR/BR Blends and Textile Fabric Using Neoprene Latex |
4 |
摻Er及Er/Yb共摻於鋅鋁偏磷酸鹽玻璃性質研究 / 楊希文(S. W. Yung);林惠娟(H. J. Lin);許冠伶(K. L. Hsu) 23-29
Properties Study of Erbium Doped and Erbium/Ytterbium Co-doped Metaphosphate Glasses (ZnO-Al2O3-P2O5) |
5 |
沃斯回火延性鑄鐵中變韌肥粒鐵之碳含量分析 / 張柳春(L. C. Chang);林進誠(J-C Lin) 30-35
Carbon in Bainitic Ferrite of Austempered Ductile Irons |
6 |
聚苯胺／奈米級碳黑導電複合材料之製備與電性研究 / 林彥文(Y. W. Lin);李倪幸(N. X. Li);吳宗明(T. M. Wu) 36-40
Preparation and Characterization of Polyaniline/Carbon Black Composites |
7 |
錫鋅系五元無鉛銲錫球與BGA基板Cu/Ni-P/Au界面之研究 / 邱盈達(Y. T Chiu);林光隆(K. L. Lin) 41-45
Interfacial Bonding Behavior between Sn-Zn Series Lead-Free Solders and Cu/Ni-P/Au Substrate |
8 |
複合奈米纖維不同合成技術及特性探討 / 黃裕豪(Y. H. Huang);陳金銘(J. M. Chen);謝建德(C. T. Hsieh);郭蓉蓉(R. R. Kuo);蘇恆毅(H. Y. Su) 46-50
Fabrication of Composite Nanofibers by Different Synthesis Methods |
9 |
17-4 PH不銹鋼雷射披覆銲件之機械特性探討 / 吳寭政(Hsien-Cheng Wu);陳鈞(Chun Chen) 51-55
Mechanical Properties of Laser-cladded 17-4 PH Stainless Steel
|
2005 Jun. vol. 37 issue 2 |
1 |
微觀結構演變對AZ31鎂合金高溫機械性質之影響 / 潘俊宏(J. H. Pan);陳正益(C. Y. Chen);楊智富(C. F. Yang) 57-65
The Effects of Microstructural Evolution on the Elevated Temperature Mechanical Properties of an AZ31 Mg Alloy |
2 |
化學鍍鎳製備條件對製作高分子金屬複合微球之影響 / 鄭義忠(I. C. Cheng);王唯帆(W. F. Wang);李偉雄(W. S. Lee);孫長春(C. C. Sun);胡文華(W. H. Whu) 66-74
Effects of Plating Conditions on the Preparation of Polymer-Metal Composite Spheres |
3 |
摩擦旋轉攪拌製程對AZ31鎂合金晶粒細化之研究 / 張志溢(C. Y. Chang);李敬仁(C. J. Lee);黃志青(J. C. C. Huang) 75-81
Grain Size Refinement in AZ31 Magnesium Alloy by Friction Stir Processing |
4 |
錫／銅雙層金屬薄膜之界面反應與反應生成動力學研究 / 廖建能(C. N. Liao);魏仲廷(C. T. Wei) 82-86
A Kinetic Study of Sn/Cu Bimetallic Thin Film Reaction |
5 |
Cu-Zn-Sn形狀記憶合金之α1-plate析出成長模式觀察 / 徐正恩(C. A. Hsu);鄭裕凱(Y. K. Cheng);徐永富(Y. F. Hsu);王文雄(W. H. Wang) 87-92
The Growth Phenomenon of α1-plate in Cu-Zn-Sn Shape Memory Alloys |
6 |
局部電化學沈積法之一微結構製程及機械性質量測 / 楊仁泓(J. H. Yang);黃英修(Y. H. Huang);李春穎(C. Y. Lee);林招松(C. S. Lin) 93-99
Localized Electrochemical Deposition Process and Mechanical Property Measurements for One-Dimensional Structure |
7 |
人工關節材料顆粒引發兔滑液膜細胞凋亡作用之研究 / 朱峰民(F. M. Chu);連雙喜(S. S. Lian);宋晏仁(Y. J. Sung) 100-104
The Study of Particles Joint Replacement Materials Induce Apoptosis of Rabbit Synoviocytes |
8 |
以氮化鋁薄膜製作薄膜體聲波共振器之研究 / 周正賢(C. H. Chou);林永振(Y. C. Lin);戴念華(N. H. Tai);黃金花(J. H. Huang);林諭男(I. N. Lin) 105-109
Synthesize Highly-textured AIN Thin Films and Study on Its Application to Thin Film Bulk Acoustic Wave Resonators |
9 |
循環塑變對雙相鋼及其銲接件低週次疲勞與微觀組織研究 / 邱柏凱(P. K. Chiu);王星豪(S. H. Wang);翁光良(K. L. Weng);楊哲人(J. R. Yang);黃義順(Y. S. Huang);方仁(J. Fang) 110-115
A Study of Microstructure and Fatigue Property of Cyclic Plastic Deformation in Duplex Stainless Steel and Its Weldment
|
2005 Dec. vol. 37 issue 4 |
1 |
銀電極與氧化鑭－氧化矽－氧化硼－莫來石(LSBM)玻璃陶瓷共燒之介面微結構分析 / 王郁茹(Y.J. Wang);韋文誠(W.C.J. Wei) 173-181
Analysis of Interfacial Microstructures of Co-fired Silver Electrode and La-Si-B-O-mullite Glass Ceramics |
2 |
利用聚乙烯一辛烯彈性體接枝馬來酐改善聚對苯二甲酸乙二酯／高密度聚乙烯摻合物之相容性 / 邱顯堂(H.T. Chiu);蕭耀貴(Y.K. Hsiao) 182-188
Compatibilization of Poly (ethylene terephthalate)/ High Density Polyethylene Blends with Maleic Anhydride-Grafted-Polyethylene-Octene Elastomer |
3 |
以熱壓燒結法製備Ti3SiC2陶瓷材料及其微結構與機械性質之研究 / 羅文賾(W.T. Lo);黃肇瑞(J.L. Huang);李丁福(D.F. Lii);盧鴻華(H.H. Lu) 189-195
Investigation on Microstructure and Mechanical Properties of Ti3SiC2 Ceramics Synthesized by Hot-pressed Sintering |
4 |
AISI 304L不銹鋼表面鈰－磷酸化成處理之抗蝕性研究 / 洪佳博(C.P. Hung);林智遠(C.Y. Lin);吳建國(J.K. Wu) 196-203
A Study on the Corrosion Resistance of Cerium-phasphating Conversion Treatment of AISI 304 Stainless Steel |
5 |
Zn2SiO4：Ti薄膜之結晶性特質對發光行爲之影響 / 林志謀(C.M. Lin);陳貞夙(J.S. Chen) 204-210
The Influence of Crystallinity on Emission Behavior of Zn2SiO4: Ti Thin Film |
6 |
藍光可寫一次a-Si/Ni記錄薄膜特性之研究 / 簡森村(S.T. Jean);何永鈞(Y.C. Her) 211-217
A Study of a-Si/Ni Bilayer Recording Film for Write-once Blue-ray Disk |
7 |
直接甲醇燃料電池質子傳導膜結構性質模擬 / 黃天榮(T.J. Huang);張金泉(J.C. Chang);葉吉田(J.T. Yeh);邱佑宗(Y.T. Chiu) 218-223
Molecular Dynamics Simulation of Microstructure and Properties in the DMFC Membran |
8 |
SiC/Ti50Cu28Ni15Sn7塊狀金屬玻璃基複合材料之製備與特性研究 / 鄭義冠(I.K. Jeng);李丕耀(P.Y. Lee) 224-229
Formation of Ti-based Bulk Metallic Glass Composites Containing SiC Particles |
9 |
體積效應對SnAgCu無鉛銲料與Ni銲接反應的影響 / 楊素純(S.C. Yang);何政恩(C.E. Ho);高振宏(C.R. Kao) 230-234
The Effect of Volume on the Soldering Reaction between SnAgCu Solders and Ni |
2006 Mar. vol. 38 issue 1 |
1 |
pH值對鋰鈷氧正極分散性質和電池性能的影響 / 董怡伶(Y. L. Tung);李嘉甄(C. C. Li);李志聰(J. T. Lee) 1-6
Effects of pH on the Dispersion and Cell Performance of LiCoO2 Cathodes |
2 |
以RF磁控濺鍍法製作氧化鋅一維奈米柱狀結構 / 黃俊翰(J. H. Huang);劉全璞(C. P. Liu) 7-10
Fabrication of One-dimensional ZnO Nanorods by RF Magnetron Sputter |
3 |
中溫固態氧化物燃料電池Sm0.5Sr0.5Co1-xCuxO3-δ陰極材料之特性研究 / 林忠達(C.T. Lin);洪逸明(I.M. Hung);方冠榮(K.Z. Fung);洪敏雄(M.H. Hon) 11-17
The Characterization of Oxygen Deficit Cathode Sm0.5Sr0.5Co1-xCuxO3-δ (x=0~0.3) for Intermediate Temperature-Solid Oxide Fuel Cells (IT-SOFCs) |
4 |
鈮酸鋰複合晶圓延性製程技術開發 / 吳嘉城(C.C. Wu);陳采寧(T.N. Chen);洪瑞華(R.H. Horng);何世賢(S.S. Ho);丁嘉仁(C.J. Ting);蔡宏營(H.Y. Tsai);武東星(D.S. Wuu) 18-23
Ductile-Mode Fabrication Process for Hybrid Lithium Niobate Wafers |
5 |
以二氧化矽及高分子混成奈米粒子來控制光子晶體中之能隙 / 陳學禮(H. L. Chen);林彥辰(Y. C. Lin);謝坤哲(K. C. Hsieh);許宗翰(T. H. Hsu);鄭旭君(H. C. Cheng) 24-28
Continuously Tuning Photonic Bandgap of Opal Structures by Utilizing Polymer and Silica Hybrid Colloids |
6 |
壓克力樹脂／層狀雙氫氧化物奈米複材之合成及性質研究 / 蔡宗燕(T.Y. Tsai);呂紹文(S.W. Lu);李福壽(F.S. Li) 29-32
Preparation and Characterization of PMMA/Layered Double Hydroxides Nanocomposite |
7 |
以KPS起始劑合成之PS球爲模板製備TiO2中空球之研究 / 詹志潔(C.C. Chan);張忠傑(C.C. Chang);朱慧娟(H.C. Chu);陳靜誼(C.Y. Chen);鄭凱云(K.Y. Cheng);王仕凱(S.K. Wang) 33-38
Preparation and Characterization of TiO2 Hollow Spheres Using KPS-initiated PS Spheres as Templates |
8 |
Cr、Nb、Mo和W的摻雜對(Bi, La)4Ti3O12、(Bi, Nd)4Ti3O12和(Bi, Pr)4Ti3O12膜的微結構及鐵電性的影響 / 張天麟(T.L. Chang);柯志遠(C.Y. Ko);林文台(W.T. Lin) 39-43
Effects of Cr-, Nb-, Mo- and W-doping on the Microstructures and Ferroelectric Properties of (Bi, La)4Ti3O12, (Bi, Nd)4Ti3O12 and (Bi, Pr)4Ti3O12 Films |
9 |
可撓式陰極電致色變元件之製備及其電致色變性質之研究 / 張峻豪(C. H. Chang);姜岳良(Y. L. Chiang);林永森(Y. S. Lin) 44-48
A Study of Preparation and Electrochromic Properties for the Flexible Cathode Electrochromic Device |
10 |
金屬射出成形散熱片與蒸氣盒之散熱性質研究 / 陳柏源(B.Y. Chen);黃坤祥(K.S. Hwang);王青志(C.C. Wang) 49-55
Thermal Dissipation Performance of a Heat Sink/Vapor Chamber Prepared by Metal Injection Molding Process |
11 |
以反應性射頻磁控濺鍍法在PET基材上製備氮化鈦薄膜與特性分析 / 林明志(M.C. Lin);張立信(L.S. Chang) 56-60
Preparation and Characterization of Titanium Nitride Thin Film Deposited on Polyethylene Terepthalate by Reactive Radio Frequency Magnetron Sputtering |
2006 Jun. vol. 38 issue 2 |
1 |
鋁對鑭鎳系儲氫合金活化與毒化過程之影響 / 林新智(H. C. Lin);林昆明(K. M. Lin);宋至偉(C. W. Sung);吳昆秦(K. C. Wu);林俊良(C. L. Lin) 61-69
The Influence of Al on the Activation and Poisoning Process of LmNi5-based Hydrogen Storage Alloys |
2 |
摩擦攪拌製程製造Al-Al3Ti複合材料 / 許芝菁(C. J. Hsu);張期詠(C. Y. Chang);高伯威(P. W. Kao) 70-75
Fabrication of Al-Al3Ti Composites by Friction Stir Processing |
3 |
氮與空氣比對16Cr-10Ni-2Mo不銹鋼δ-肥粒鐵相分解之研究 / 林啓明(C. M. Lin);黃建一(G. I. Huang);謝鴻志(H. C. Hsieh);林東毅(D. Y. Lin) 76-81
The Influence of Nitrogen/Air Ratio on the Decomposition of Delta Ferrite of 16Cr-10Ni-2Mo Stainless Steel |
4 |
商用LiMn2O4及LiFePO4材料其電化學性能及失效模式分析之研究 / 蘇靜怡(C. Y. Su);吳弘俊(H. C. Wu) 82-87
The Electrochemical Performance and Fading Mechanism Analysis of Commercial LiMn2O4 and LiFePO4 |
5 |
電遷移對共晶錫鉍銲點微結構與界面反應之影響 / 陳龍泰(L. T. Chen);陳志銘(C. M. Chen) 88-92
Electromigration Effects on Microstructure and Interfacial Reaction in Eutectic SnBi Solder Joint |
6 |
濺鍍碳摻雜二氧化鈦薄膜之光觸媒性質 / 王順輝(S. H. Wang);黃瓊儀(C. Y. Huang);翁明壽(M. S. Wong) 93-97
Reactively Sputtered Carbon-doped Titanium Oxide Films as Visible-Light Induced Photocatalyst |
7 |
鎳被覆表面改質對LiMn2O4陰極材料之充放電特性效應探討 / 洪飛義(F. Y. Hung);呂傳盛(T. S. Lu);陳立輝(L. H. Chen);林宏茂(H. M. Lin);廖宏奇(H. C. Liao) 98-104
The Surface Modification Effect of Ni on the Charge and Discharge Characteristics of LiMn2O4 Cathode Materials |
8 |
高分子輔助電紡技術製備二氧化鈦奈米絲 / 陳俊佑(J. Y. Chen);林俊男(J. N. Lin);陳宏政(H. C. Chen);郭昌恕(C. S. Kuo) 105-108
Polymer-assisted Electrospinning of Titania Nanofibers |
9 |
鋅－22%鋁合金之加工軟化與退火硬化 / 余育陞(Y. S. Yu);詹育碩(Y. S. Chan);楊智富(C. F. Yang) 109-115
Strain Softening and Anneal Hardening in a Zn-22 wt.% Al Alloy |
10 |
利用噴霧熱解法製備氧化錳粉體之研究 / 林信輝(H. H. Lin);陳錦毅(C. Y. Chen);蔡健益(C. Y. Tsay);林中魁(C. K. Lin) 116-120
Preparation of Manganese Oxide Powder by Spray Pyrolysis
|
2006 Sep. vol. 38 issue 3 |
1 |
固定幾丁聚醣聚丙烯不織布在抗菌醫療敷材的應用 / 廖峻德(J. D. Liao);林淑萍(S. P. Lin);田育彰(Y. C. Tyan);陳家杰(C. C. Chen);王士豪(S. H. Wang) 121-128
Immobilized Chitosan onto Polypropylene Non-Woven Fabric for Anti-bacterial and Biomedical Applications |
2 |
奈米碳管的密度調變效應對超高電容器之電容特性的影響 / 洪瑋澤(W. T. Hong);吳慧敏(H. M. Wu);方偉權(W. C. Fang);林麗瓊(L. C. Lin) 129-132
The Effect of CNTs Density Control on the Capacitance Performance of Superconductor |
3 |
以陽極氧化法於鈦板上沈積含鈣、磷之氧化層 / 劉建宏(J. H. Liu);陳懋德(M. T. Chen);林招松(C. S. Lin) 133-138
Calcium-and Phosphorus-containing Oxide Layer on Titanium Fabricated by Anodic Oxidation |
4 |
聚吡咯／Fe3O4奈米複合材料之製備與電磁性質研究 / 顏湘婕(S. J. Yen);吳宗明(T. M. Wu) 139-143
Preparation and Electrical-magnetic Properties of Polypyrrole/Magnetite Nanocomposites |
5 |
碳材被覆於矽／石墨複合物應用於鋰離子電池負極材料之研究 / 李源弘(Y. H. Lee);吳玉祥(Y. S. Wu);黃雅夫(James Huang);蔡宜霖(Y. L. Tsai);賴相宇(H. Y. Lai) 144-148
Performance Study of Carbon Coating on Si/Graphite Composites for Lithium Ion Battery Anode Materials |
6 |
利用低壓平板火焰法成長奈米級二氧化鈦薄膜於染料敏化太陽能電池之研究 / 陳怡嘉(Y. J. Chen);蘇昱安(Y. A. Su);蔡宜親(Y. C. Tsai) 149-156
Synthesis of Nanostructured TiO2 Thin Film by Low Pressure Flat Flame Method for Dye Sensitized Solar Cell |
7 |
鎂摻雜氮化鋁鎵電子阻障層對氮化銦鎵－氮化鎵發光二極體影響之研究 / 吳國梅(G. M. Wu);陳信豪(S. H. Chen) 157-161
Mg-doped AlGaN Electron-blocking Barriers for InGaN/GaN Light-emitting Diodes |
8 |
晶粒尺寸效應對銅奈米機械性質與變形機制影響之研究 / 張守一(S. Y. Chang);張庭魁(T. K. Chang);蕭翔隆(H. L. Hsiao) 162-168
Grain Size Effect on Nanomechanical Properties and Deformation Behavior of Copper |
9 |
Zr60Al7.5Ni10Cu17.5Si4B1非晶質合金之結晶行爲及熱穩定性之探討 / 鄭憲清(J. S. C. Jang);王怡華(I. H. Wang);張量然(L. J. Chang);張均富(C. F. Chang);黃宥祺(Y. C. Huang);蕭証文(T. W. Shau) 169-174
Study of the Crystallization and Thermal Stability of the Zr60Al7.5Cu17.5Ni10Si4B1 Amorphous Alloy |
10 |
以旋轉工作台與羊毛輪進行光學玻璃二階段奈米級拋光加工製程研究 / 駱榮富(R. F. Louh);陳建任(L. Chen) 175-180
Combined Microgrinding and Polishing Machining of Optical Glasses by Using Wool-Felt Wheels and Rotary Table
|
2006 Dec. vol. 38 issue 4 |
1 |
平板玻璃之溢流熔融製程模擬 / 林惠娟(H.J. Lin);張煒國(F.Y. Hsu);許富淵(W.K. Chang) 181-186
Simulation of Overflow Fusion Process for Flat Glass |
2 |
利用奈米壓痕儀量測BOAC (Bond Pad Over Active Circuits)結構的機械強度和接合性 / 湯季高(C.K. Tang);吳炳昌(B.C. Wu);饒瑞孟(Raymond Jao);陳國明(K.M. Chen);呂志鵬(Jihperng Leu) 187-194
Evaluation of Mechanical Strength and Bondability of BOAC (Bond Pad over Active Circuits) Structures using Nanoindentation |
3 |
Pt/γ-Al2O3/C親水性陽極電極材料的製備及特性研究 / 趙文愷(W.K. Chao);白益豪(Y.H. Pai);曾志明(F.S. Shieu);薛富盛(J.M. Zen) 195-200
Preparation and Characteristic Investigation of Hydrophilic Pt/γ-Al2O3/C |
4 |
單晶矽太陽電池基板Texturing結構之最佳化模擬與實驗 / 楊佳明(C.M. Yang);游仁州(J.C. Yu);吳秉叡(B.R. Wu);連水養(S.Y. Lien);武東星(D.S. Wuu);韓斌(P. Han);洪瑞華(R.H. Horng) 201-205
Textured Structure Optimization of Crystalline Silicon Solar Cells Using Ray-Tracing Simulation and Anisotropic Etching Techniques |
5 |
電遷移對銅原子在熔融Sn3.5Ag無鉛銲料中擴散行爲之影響 / 張建偉(C.W. Chang);黃建融(J.R. Huang);高振宏(C.R. Kao) 206-212
The Effect of Applied Electron Current on the Cu Diffusion in Molten Sn3.5Ag Solder |
6 |
奈米碳材的材料特性對其儲氫量之影響研究 / 林冠宇(K.Y. Lin);蔡恆毅(H.Y. Tsai);張仍奎(J.K. Chang);余明昇(M.S. Yu);楊聰仁(T.J. Yang);蔡文達(W.T. Tsai) 213-218
Physicochemical Properties of Nano-sized Carbon Materials Affecting the Hydrogen Storage Performance |
7 |
Cu(WN)/Si無阻障層界面反應物生成之研究 / 朱瑾(J.P. Chu);林宗新(C.H. Lin) 219-222
Formation of a Reacted Layer at the Barrierless Cu(WN)/Si Interface |
8 |
高效率多孔隙氮化銦鎵發光元件研製 / 黃立陽(L.Y. Huang);張政謙(C.C. Chang);謝秉承(P.C. Hsieh);楊仲傑(C.C. Yang);林佳鋒(C.F. Lin) 223-227
High-Efficiency InGaN-based Light-Emitting Diodes with Nanoporous GaN:Mg Structure |
9 |
二氧化鉿與五氧化二鈮陣列波導光柵設計模擬與薄膜製程特性研究 / 吳承修(C.S. Wu);賴亦岑(Y.T. Lai);李鵬霄(P.H. Lee);翁敏航(M.H. Weng);劉文仁(W.J. Liu);陳治民(C.M. Chen);賴暎杰(Y.C. Lai) 228-234
Researches on Design Simulation and Fabrication Process of Hafnium Oxide and Niobium Oxide Arrayed Waveguide Gratings |
10 |
化學氣相沈積法製備氮化鎵奈米線及其特性分析 / 施承達(C.D. Shin);李國豪(K.H. Lee);陳引幹(I.G. Chen) 235-240
The Preparation and Characterization of GaN Nanowire Grown by Chemical Vapor Deposition Method
|
TOP
Contact Us
Best dpi：1024*768
第三十一屆第四次理監事聯席會議紀錄
